ASTM D-2239 · Inside Controlled · 100 PSI
Interstate 100 Turf Irrigation Pipe
Interstate 100 is our inside-controlled polyethylene pipe for irrigation applications. Made to ASTM D-2239, the inside diameter is consistent across the product line — a single set of insert fittings works throughout your system. From residential sprinkler systems to large-scale agricultural irrigation across the Columbia Basin, Interstate 100 delivers reliable 100 PSI performance in flexible coils sized for every application.
Nominal Size
Cross-Section Comparison
Compare PE4710 SIDR-19 and PE3608 SIDR-15 — both 100 PSI, same inside diameter, different wall thickness due to different material strength.
Specifications
All available products for the selected size. I.D. is constant across both material grades.
| Ratio | Material | Pressure | I.D. | Calc. O.D. | Min. Wall | Wt / 100' | Cut Sheet |
|---|
A minimum order may be required for colors other than black. Some sizes are only available in black. Contact us for details.
All Sizes
Complete specifications for Interstate 100. I.D. is identical across both material grades at each nominal size — insert fittings are interchangeable.
| Size | I.D. |
SIDR-15 PE3608 |
SIDR-19 PE4710 |
|---|---|---|---|
| 3/4" | 0.824" | 0.060" | 0.060" |
| 1" | 1.049" | 0.070" | 0.060" |
| 1-1/4" | 1.380" | 0.092" | 0.073" |
| 1-1/2" | 1.610" | 0.107" | 0.085" |
| 2" | 2.067" | 0.138" | 0.109" |
Wall thickness values shown. I.D. is constant across both material grades.
Available Colors
Black
General purpose. PE4710 and PE3608. Ships from stock.
Blue
PE4710 NSF-14 and NSF-61. PE3608 NSF status pending.
Purple
Non-potable water applications including reclaimed water and direct lake or river sourced irrigation. NSF-14 only.
Green
PE4710 and PE3608. Popular for turf and agricultural irrigation. No NSF certification.
Grey
PE4710 only. Wire-in-pipe applications. No NSF certification.
A minimum order may be required for colors other than black. Some sizes are only available in black. Contact us for details.
Standards & Certifications
NSF/ANSI Standard #14 (PE4710 black, blue, purple; PE3608 black)
NSF/ANSI Standard #61 (PE4710 black and blue)
ASTM D-2239 — Polyethylene plastic pipe (SIDR-PR) based on controlled inside diameter
ASTM D-3350 — Polyethylene plastics pipe and fittings material
ASTM D-1248 — Polyethylene plastics molding and extrusion materials
Interstate Plastic, Inc. pipe and tubing are in compliance with the Trade Agreement Act (19 USC 2501) and are proudly made in the USA in Post Falls, ID.